Is a 40x20 pattern of a simple square really too much? I'm trying to model a vacuum table and my 40x20 pattern is absolutely destroying fusion 360. It runs great otherwise, but I turned down all the graphics settings regardless. Not surprisingly, didn't help. This is a sketch pattern. Using spacing, not extent.
Results 1 to 4 of 4
-
01-21-2017, 08:23 PM #1
Registered
- Join Date
- Jan 2013
- Posts
- 263
Fusion 360 Slow, Hangs, Freezes doing 40x20 pattern
-
01-21-2017, 08:26 PM #2
Registered
- Join Date
- Jan 2013
- Posts
- 263
Re: Fusion 360 Slow, Hangs, Freezes doing 40x20 pattern
Patterning a 3D feature 40x20 times doesn't give me this issue.
-
01-21-2017, 08:58 PM #3
Gold Member
- Join Date
- Sep 2009
- Posts
- 1856
Re: Fusion 360 Slow, Hangs, Freezes doing 40x20 pattern
When you do patterns you pattern feature not sketch, Yes sketch patterns blow, pattern feature is fine
http://danielscnc.webs.com/
being disabled is not a hindrance it gives you attitude
[SIGPIC][/SIGPIC]
-
02-02-2017, 05:18 PM #4
Member
- Join Date
- Feb 2009
- Posts
- 311
Re: Fusion 360 Slow, Hangs, Freezes doing 40x20 pattern
Fusion certainly has a long way to go yet in terms of sketching performance. But even still, sketch patterns should only be used when absolutely necessary. Feature/component patterns are nearly always faster and easier to work with.
C|
Reply With QuoteSimilar Threads
-
g-code hangs
By baldysm in forum Haas MillsReplies: 12Last Post: 10-08-2014, 01:32 AM -
Arrow 500 Slow DNC upload to machine, also slow processing of g-code
By SnowmanSD in forum Cincinnati CNCReplies: 3Last Post: 08-08-2014, 04:42 AM -
Limit/Home wiring and how slow is slow?
By Michaelofburien in forum DIY CNC Router Table MachinesReplies: 2Last Post: 05-24-2013, 07:44 PM -
Slow response from CNC Fusion?
By JWeb in forum Benchtop MachinesReplies: 8Last Post: 11-06-2010, 08:40 PM -
Fadal 40x20 and FeatureCAM
By j81hatala in forum FadalReplies: 1Last Post: 09-22-2009, 11:22 PM
Tags for this Thread
Posting Permissions
