Hello i have recently purchased a x700 Redsail laser. I was cutting letter and the laser started to loose power then stopped working i have replaced the laser and still nothing
Thread: x700 stopped working
Results 1 to 3 of 3
-
10-22-2016, 08:15 PM #1
Registered
- Join Date
- Oct 2016
- Posts
- 3
x700 stopped working
-
10-30-2016, 03:57 AM #2
Registered
- Join Date
- Jul 2014
- Posts
- 31
Re: x700 stopped working
Not enough information here to know how to help. Assumption, everything works, x y axis except for the laser. Is that correct? The laser is not firing? If so, check you laser HVPS, is the led on? If so did you test the the HVPS by pressing the test switch? If you did, was there any lasing? If it lases, you have a control problem. If it does not lase, most likely a HVPS problem.
-
11-04-2016, 02:04 PM #3
Registered
- Join Date
- Oct 2016
- Posts
- 3
Re: x700 stopped working
Thanks for the info It was the power supply thanks
Similar Threads
-
V21 CAM stopped working
By Fabriquer in forum BobCad-CamReplies: 2Last Post: 10-13-2016, 08:47 PM -
Md1-stopped working
By Scrambled1 in forum HURCOReplies: 4Last Post: 05-11-2016, 08:32 PM -
touch off stopped working?
By BrainFried in forum LinuxCNC (formerly EMC2)Replies: 0Last Post: 06-25-2015, 12:23 AM -
SX3 Stopped Working
By mikemill in forum Syil ProductsReplies: 13Last Post: 01-09-2009, 04:54 PM -
Master5 stopped working
By jderou in forum Mach Software (ArtSoft software)Replies: 2Last Post: 09-08-2004, 07:38 PM
Tags for this Thread
Posting Permissions
