I made my geometry in Bobcadcam for a simple lathe job. All i'm doing is a starting a Z0. with a corner radius of .015 to a 45 degree angle to another radius (.250) then boring back -1.5 inches. Nothing crazy except my code isn't posting as if i were to calculate it manually. Why is this ? I'm using version 25.
Here is my manual calculated code.
N22G0X6.1249
G1Z.0.F.014
G2X6.0595Z-.0135R.0463
G1X5.2298Z-.4284
G2X5.065Z-.6273R.2813
G1Z-1.5