586,693 active members*
2,959 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > HURCO > Km3p ultimax control help

Thread: Km3p ultimax control help

Results 1 to 4 of 4
  1. 09-24-2016, 05:52 PM #1
    Thecaptain
    Thecaptain is offline Registered
    Join Date
    Sep 2016
    Posts
    18

    Km3p ultimax control help

    Finally got the machine wired in and running. But it's stuck in a program, how do I get back to the home screen or at least get out of the selected program. Got it wired up and fired it up no issues or error codes but I'm at square one with the machine controller. No manual no paperwork on the machine. Any help would be appreciated
    Reply With Quote Reply With Quote
  2. 09-24-2016, 06:00 PM #2
    Scrambled1
    Scrambled1 is offline
    Join Date
    Mar 2013
    Posts
    156

    Re: Km3p ultimax control help

    Press manual button far right green button then the left green
    Button. Power and start. Then you have to calibrate the machine (follow on screen directions). Let me know when you get this far. Don't forget to turn the air on.

    Steve


    Sent from my iPhone using Tapatalk
    Reply With Quote Reply With Quote
  3. 09-24-2016, 06:55 PM #3
    Thecaptain
    Thecaptain is offline Registered
    Join Date
    Sep 2016
    Posts
    18

    Re: Km3p ultimax control help

    [IMG][/IMG]

    Here is my control as you can see there's not much color left. Also what psi is recommended
    Reply With Quote Reply With Quote
  4. 09-24-2016, 07:07 PM #4
    Scrambled1
    Scrambled1 is offline
    Join Date
    Mar 2013
    Posts
    156

    Re: Km3p ultimax control help

    Can you email me the picture? It won't open on my phone

    [email protected]


    Sent from my iPhone using Tapatalk
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Km3p Ultimax 2
    By bertcnc in forum HURCO
    Replies: 14
    Last Post: 10-13-2020, 02:57 AM
  2. Hurco ultimax km3p crt not working - just picked up used machine
    By Heights1 in forum HURCO
    Replies: 12
    Last Post: 11-10-2014, 12:59 AM
  3. Why is the graphics screen doing this? KM3P Ultimax II
    By pondringjunkman in forum HURCO
    Replies: 5
    Last Post: 12-23-2012, 01:01 PM
  4. KM3P Ultimax Boards
    By noidea in forum HURCO
    Replies: 6
    Last Post: 09-19-2012, 02:01 PM
  5. KM3P Ultimax power up problem
    By Rick Kight in forum HURCO
    Replies: 2
    Last Post: 10-13-2008, 12:41 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules