Tormach - PCNC 770 Series 3
Less than a year ago I decided I wanted to get into machining. I bought a brand new 770 and lots of accessories including the power draw bar. Unfortunately I lost interest very quickly and I am now looking to sell the machine and everything with it.
It’s in essentially brand new condition, I have probably run the spindle for less than 20 hours total.
Hopefully it will find a home with someone who will make good use of it.
It can’t be shipped, so you will need to pick it up. I’m in Chicago and live in a loft apartment right next to the freight elevator. This is extremely heavy, you will need to bring a dolly and some strong friends to help you.
Here is the list of everything I have, with the part numbers. I’m selling everything together.
- 32084 - PCNC 770 Series 3
- 31302 - Manual Oiler
- 33337 - G Wizard Machinist Calculator for Tormach
- 31748 - PCNC 770 Owner's Kit
- 30151 - 30mm Wrench for TTS-ER20 Nut
- 32799 - 5" Parallel Set
- 31789 - 2pc Vise Alignment Keys with Screws for 5" CNC Vise
- 31759 - 5" CNC Vise
- 31386 - Machine Oil
- 35450 - 17" Touch Screen LCD Monitor
- 35286 - PathPilot™ Controller
- 32700 - Pro Ring Light with SuperBright LEDs
- 35537 - 6061-T6 Aluminum: 5/8" x 1-1/2" x 6" (20)
- 31947 - Basic 3 Piece Indicator Set
- 30616 - Jog Shuttle
- 31334 - Chip Guard for PCNC 770
- 30286 - Machine Arm
- 30302 - TTS Tool Tray
- 31991 - Pneumatic Hose Kit for Power Draw Bar/ATC/Fogbuster
- 31728 - Power Drawbar Foot Pedal Kit
- 32436 - PCNC 770 Power Drawbar
- 31761 - 8" Digital Height Gauge
- 31713 - Small Granite Surface Plate with Integrated Tool Hole
- 35356 - TTS-R8 Adaptor Collet
- 34086 - ER20/ER16 Deluxe TTS Wrench Set
- 31709-2 - Carbide Inserts for Aluminum, Plastic, Non-ferrous & Cast Iron
- 2 x 32309 - Passive Probe w/ 10mm TTS Mount
- 32021 - TTS-ER20 Tension/Compression Tapping Head
- Trico MD-2100 Cooler/Mister/Lubricator
- Air lubricator and drier
- Air tool oil
- Trico lubricant
- Lots of aluminium in various sizes (see photos)
- A shop vac
- An air compressor inside a very heavy sound deadening box (it’s very, very quiet - because I live in an apartment building)
- Lots of 31829 - TTS-ER20 tool holders and lots of collets
- Over 40 carbide tools, 90% of them have never been used - see the photos
Everything combined cost me over $15k. If you can come and pick everything up, then I would happily take $10k.
You can see lots more images here : https://dl.dropboxusercontent.com/u/...770_images.zip
I also created a Craiglist post here: Tormach PCNC 770 3 Series CNC machine (and lots of accessories)Thanks! Hopefully this finds a great home!