Looking for a quote on cutting stepped pockets into a 1/8" thick plexiglass sheet (black preferably) as shown in attached pdf.
If 1/8" is too thin due to the stepped pockets in back, there is no problem with increasing thickness to a 1/4".
One sheet now and 6-10 later. McMaster-Carr has sheets
Please Advise.
Thanks!
Results 1 to 7 of 7
-
12-29-2006, 01:05 AM #1
Registered
- Join Date
- Dec 2006
- Posts
- 2
rfq-----custom black plexiglass sheet
-
05-27-2009, 04:31 PM #2
Registered
- Join Date
- May 2009
- Posts
- 7
Hi how are you doing. I see that u need some plexi cut. I work in a shop and i do all the programing and cutting on the router. I am interested in cutting these pieces for you and any others you need to have done. Give us a call 1-302-834-4448. We have great turn around time and parts cut to perfection. Ask 4 Mike trincia or me Mike Jr.
-
05-27-2009, 10:08 PM #3
Registered
- Join Date
- May 2009
- Posts
- 2
PM sent
-
05-27-2009, 10:17 PM #4
Registered
- Join Date
- Jan 2008
- Posts
- 449
Did you guys notice the original RFQ is from 2006?
-
05-28-2009, 02:11 AM #5
Registered
- Join Date
- Jan 2009
- Posts
- 56
LOL!
-
05-28-2009, 01:59 PM #6
Registered
- Join Date
- May 2009
- Posts
- 2
Well that goes to show----- I'm new and didn't pay attention. OtFCncguy got me!!! Fool me once--shame on me..........
Thanks Dualkit.
-
05-28-2009, 04:16 PM #7
Registered
- Join Date
- Jan 2009
- Posts
- 56
LOL!
I didn't see it either!
TM
Reply With Quote
Posting Permissions
