Okay,
Im chasing a way of mounting for my x and y axis round 20mm shaft, reason I need support is for the lengths of the axis's x 1100mm y 830mm.
I have a few options but no access to parts in aussie land except via net and cost for shipping from the US. I can get a length of 3/4 cradle by 24 inches from thomson suppliers in the states for reasonable price, and cut this down into litle saddles to support the lengths say every 200mm. The other option is to use a straight 10mm flat bar and machine a groove in the top for the lengths,sit the round into the recess and spot weld the ends Has anyone done this previously or knows of a cheap supplier for full length saddles
Any helps apperciated guys