I have been considering buying an abrasive water jet for architectural/custom stone cutting. I currently sub this work out to a company with an Omax 55100. It seems to be a very good machine and the parts it make for me are perfect, however I am wondering if this is kinda overkill. If I were to buy an AWJ, maybe I should not spend so much as i do not need .003 on my parts? any opinions? what I would like is if some of you could help me out with a list of AWJ manufacturers (other than OMAX) so i can do some research and shop around a bit. advice, recommendations, etc. are welcome.
Thread: AWJ builders
Results 1 to 4 of 4
-
12-24-2006, 08:43 PM #1
Registered
- Join Date
- Jul 2006
- Posts
- 64
AWJ builders
-
12-30-2006, 12:13 PM #2
Registered
- Join Date
- Dec 2006
- Posts
- 62
No matter what you do... a 50hp pump and bits and pieces and head are going to cost you $80k... before you even look at a table. Is that the road you want to go down for table tops?
-
12-30-2006, 12:15 PM #3
Registered
- Join Date
- Dec 2006
- Posts
- 62
I also know a good company. Check your PM box.
-
01-02-2007, 08:33 PM #4
Registered
- Join Date
- Jan 2007
- Posts
- 3
Waterjet Companies
Richel, Inc. is the largest reseller of used waterjets in the U.S. and Canada. We also ran a waterjet job shop for several years. So, we have run, repaired, and modified waterjets from nearly every manufacturer. Feel free to give us a call at 330-677-9100 and we can talk to you about the advantages of the different machines. We can also send you a list of the prices for all of our used machines.
Reply With Quote
Posting Permissions
