[tano]

Hi Guys

I have an old machine with Sinumerik 3M control.Everything on machine is good except the small memory.
I have 32kb and i have information that can be upgrade to max 128kb.
If someone knows something about this issue let me know.This control don't allow DNC to computer.
The CPU card is 6FX1111-0AA02 and the model of Sinumerik is 6FC 3451-OFA-Z

Many thanks

[primotechnics]

Hi,

I've been having the same issue for while, see here ? Bekijk onderwerp - Siemens 810M GA1 geheugen uitbereiding

Maybe this helps?
Gr
Bart

[tano]

Hi,

I've been having the same issue for while, see here ? Bekijk onderwerp - Siemens 810M GA1 geheugen uitbereiding

Maybe this helps?
Gr
Bart

That is for Sinumerik 810. Do you have success on Sinumerik 3M ?

[FabioBar]

If the version of your SINUMERiK 3M is 4B or 4C may be that you can upgrade to 130kb, I'm just do it yesterday, but at the beginning I had 64kb.
Check version and, read the parameter 427.

[tano]

The version software is 4B and i upgrade successfully to 128kb.I need to install one more card in the soccets and two other RAM cards.