Hi. The machine is great. Very well made and engineered. I don't regret my purchase. My machine has the linear 8 tool ATC.
However I am far from happy overall but i guess you have to accept that this isn't a turn key
the atc problem.
Perhaps and hopefully Im a week from now all will be well.
One of the small things that has really annoyed me in the last two days is the issues regarding the auto lubrication machine.
There are no english instructions and try as I have No matter how many times I ask for information and instructions in English none are forthcoming. I have oil pissing onto the floor. I have asked for a schematic diagram so that I know which valve on the manifold to adjust each slide. They say they don't have one " pathetic". How else do you know which valve controls each lubrication point unless you literally uncouple each hose, let more oil out and then turn each adjuster on the manifold, one by one. Hard work compared with supplying a simple diagram. I really cannot believe I'm the first to ask for this. Am I being unreasonable, please tell me?
Them there was the oil type, I asked what oil to put in the applicator as there was a small amount in.
I was told ""#29, #30 or #!31. This doesn't mean anything to me on the Uk, does anyone know what these references mean.
After two days of further questions and basically being ignored, I have took a guesstimate on 10w/40 engine oil as this equate similar to 40 cst.
I've now been passed over to Omni tech Support by Zach. However, Albert Lieu wasn't in work today, another day lost.
Let's see what tomorrow brings, erm! Correction - later today.
Here are some videos of the ATC problem.
https://drive.google.com/open?id=0B_...jVFTXVtZ0VyUEE
Signing off @ 1.26 am.
Sent from my iPhone using Tapatalk