Hello,

I'm from Europe and found a good offer for new milling machine and I bought it !
here it is : Milling machine VF25 | Cau Cau
VF 25 L Vario
It's look like Grizzly and PM 25 MV and european Optimum BF 25 L Vario and Bernarno BF 25 L,

So my question is :

Can I use ball screw set from G0407 from supplier :
[email protected]
1pc RM1605-787.2mm with a DOUBLE BALLNUT and end machined as the drawing(the ballnut is machined as the drawing request)
1pc RM1605-345.5mm with a DOUBLE BALLNUT and end machined as the drawing
1pc RM2005-600mm with a DOUBLE BALLNUT and end machined as the drawing

or I need to build my own with the lathe from 900 600 and 400mm ballscrew.

Thanks!!!!