[CNC Machine OT]

Please only way for me to signal F150.0 = 1 because Fanuc CNC lathes my OTB not perform code M , T , G


F150.0
--------//---------------------------------------------------------()--- R502.1



R502.1
-------------//-----------------(SUB 4 DEC(/F151/0311)---------------()- Y51.1

MDI :
When I entered and started M03 S2000
M code is not implemented
When entering code T0101 T not done
When I enter the code G28 X0.0 Z0.0 G not done
In JOG :
X, Z runs well
In ZRN : Zero X , Z ok

[guhl]

may be "MST lock" mode is activated?

[CNC Machine OT]

Hi Guhl

On the control panel without MST lock button .
Thank you for your ideas

[Superman]

When I entered and started M03 S2000
M code is not implemented
When entering code T0101 T not done
When I enter the code G28 X0.0 Z0.0 G not done
In JOG :
X, Z runs well
In ZRN : Zero X , Z ok

Has turret been indexed (Homed) ......
- usually done, after X&Z have been Homed.

[fordav11]

on newer controls (i.e. not 6T/10T) MST lock can be a software setting. Look for a screen where you set the chuck jaw clamp direction and there you may see 'Auxillary Function Lock', 'MST Lock' or something similar. Normally that is accessed via CUSTOM hardkey.

if machine is zero returned then moved manually, G28 U0 W0 in MDI must work regardless of MST lock function.
If not working you have some other issue.

[CNC Machine OT]

Hi fordav11

Thank you for your ideas