I tried it all, any help please to get a surface on this heel.
I tried it all, any help please to get a surface on this heel.
Sure.
Try a coons surface.
I tried, it didn't work, thank you though.
Use Swept for contour. and Ruled for sides.
I got it, thank you all. 2 rail swept, then mirrored surface. Then split and trimmed.
Trying to upload file?
Nice job ? How did you create the 2 side splines
I made a blended spline
of 1.8 and (-0.01)
is this close to what you did
If so the surface is highly dependent on the spline
would I be correct in saying this or have I got it all wrong.
Update I think I got it all wrong
would it be curve on 1 edge
Yes, curve on 1 edge.