I have a Mori Seiki with a Fanuc 18i control on it. Mori put their interface on the control and I would like to get around it. If we get the machine to lock up we can then start it without the Mori overlay, but it is difficult to get it to lock up. Does anyone know how to start this machine and bypass the Mori interface??
Results 1 to 7 of 7
-
10-30-2006, 01:58 PM #1
Registered
- Join Date
- Jul 2005
- Posts
- 7
Mori Seiki interface on Fanuc 18i HELP
-
12-28-2006, 03:59 PM #2
Registered
- Join Date
- Dec 2006
- Posts
- 6
what is the control is a msg 501 or what is it then i can help you
-
12-28-2006, 06:55 PM #3
Registered
- Join Date
- Jul 2005
- Posts
- 7
yes, it is a msg 501.
-
12-28-2006, 11:18 PM #4
Registered
- Join Date
- Dec 2006
- Posts
- 6
mori overlay
go to the setting/custom screen type in 999999999 then type in sample is this what you are looking for
-
02-22-2007, 08:34 PM #5
Registered
- Join Date
- Feb 2007
- Posts
- 158
press setting then nc
-
02-24-2007, 02:32 PM #6
Registered
- Join Date
- Dec 2006
- Posts
- 6
does this have a setting buttom or a custom buttom it would be a hard key by offsets, program etc.
-
03-20-2007, 03:54 PM #7
Registered
- Join Date
- Feb 2004
- Posts
- 142
What's wrong with the MAPPS interface? it has a lot of extra features that it offers that the Fanuc control does not.
Reply With Quote
Posting Permissions
