[Billme]

Have you found one yet? Contact me at [email protected]
I'm in Hattiesburg, ms ..Right up the road from you on 59

[Duracoat]

Hello all... i am looking to buy a used but not abused PCNC 1100 series 3 with as much accessories as possible. I would like a ATC,enclosure,collets,software,4th axis,ect.. any help would be much appreciated. I am located in New Orleans.Thanks

Buy a new 1100, well worth the money.
Great mill and customer support!!!!

[Jsteele75]

Bump to the top... still looking

[Steve Seebold]

I have a Series II (2012 Model) upgraded new drives (Teknic ClearPath Drives) and spindle, 4th Axis W/Tailstock, Tool Changer, Dulity Lathe (Wouldn't recommend), All software, 22" Monitor w/arm, New Tormach Controller Running the Latest Mach 3, full enclosure, Stand, Flood coolant pump, 60 Gal Ultra Quiet Air Compressor, TTS Tooling system, (20-30 Tools), 15 sets Parallels, Machinist tools, Countless other toys including tooling, work holding fixtures, metric and sae complete collet sets (3 ea.).

Recent replacements include all Limit Switches, all airlines. The machine has less than 200 Hours on it (Hobbyist). Have all the original documentation and books and all like the day it was shipped. Also installed is Inventor Premium and Inventor HSM. In total the machine was about 32k before 1.5k in upgrades then another 3.5k in software 4k in tooling and .5k in a custom paint job (metallic bronze and maroon (Iron Man Colors). Id bet money my machine runs faster and smoother and quieter than any other 1100 out there.

This is a mans toy for sure, I just bought another and the wife says something needs to go so make me a offer!

Total shipping weight guessing around 2600lbs

Regards,
JD

"Manufacturing is more than just putting parts together. It's coming up with ideas, testing principles and perfecting the engineering, as well as final assembly".

******Update**********

For Sale AllOne Package

PCNC 1100Series II – $9000
4^thAxis Kit and rotary table – $1500
4^thAxis Tail Stock (2) - $300
Fog buster -$400
1/4hp FloodPump & Tank - $528
4^thAxis Duality Lathe - $1500
4^thAxis Duality Lathe Gearbox $1600
Stand -$1600
Enclosure -$1200
Paint Job - $438
MonitorControl Arm - $100
SMC SoftStart Up, Air Filter, Mist Separator. - $480
ClearPathDrives - $1840
HP 22”Monitor - $189
TormachController - $750
AutomaticTool Changer - $4500
Power DrawBar – $1200
SpindleDrive Upgrade - $815
MotionUpgrade Kit - $700
ATC PressureSensor - $140
200 5/8”Work holding - $100
6” Vice - $538
5” Vice -$300
(3) 15pcsER20 Sae Collets - $130
(3) 12pcsER20 Metric Collets - $75
TTS ToolingSets - $1800
DigitizingProbe - $400
HiemerCenter Master - $350
CabinetCooling Kit - $70
AutomaticOiler - $212
Estop Kit -$70
8” 2 JawChuck - $250
8” 3 JawChuck - $380
5c colletChuck - $400
Rotary TailStock - $180
Sterrett DigitalIndicator Set - $280
SterrettCalipers - $140
Miko WirlessJog Pendant - $380
TormachPendant - $50
USBInterface Kit - $150
RS32Interface Kit - $40
ControllerCables & Wiring - $150
Tool Setter- $220
BT30 SpindleCartridge - $600
Tooling -$2000
Machinist Parallels- $1000
NoiseCancelers - $150
Tormach Keyboard,Mouse - $40
CNC Wizard -$75

Bought Used:
IngersolRand 5hp Rotary Screw Compressor / 60gal Tank – 1800 Used.

$41,110.00
Plus $1,485Shipping

AutodeskInventor Pro - $8400
Inventor HSM- $2400 Yr

$53,395Grand Total

Theres somuch more not even listed.

Sorry, but before I spent that much money on a Tormach, I would seriously consider a Haas Mini II. I have a Series II and I have owned a Haas. There is no comparison between the two machines.

[tmarks11]

Machinist Parallels- $1000

That is an expensive set of parallels... Even a new set of Brown and Sharpe will only run you $300 ($240 with an Enco 20% off...like is going on now).

PCNC 1100Series II – $9000

No way you are going to end up getting full price on a 3 year old mill. Or even above full price... Tormach Series III 1100 is only $8400, and 3 years ago it was even cheaper! In fact, many things on you list are at 7-10% higher than Tormach's price.

AutodeskInventor Pro - $8400

Autodesk Inverter Pro 2016... direct from Autodesk... is only $7300.

[Jsteele75]

Bump... still looking

[Jsteele75]

Bump...

[CadRhino]

bump.......

Bump...

[Jsteele75]

Still looking..

[Steve Seebold]

Still looking..

BUY A NEW ONE.

[NMay]

Still looking..

We have a Series 2 that will be going up for sale in a month pending a new machine. How soon are you needing one?

[Jsteele75]

We have a Series 2 that will be going up for sale in a month pending a new machine. How soon are you needing one?

We are looking for a series 3 version now. Not interested in a series 2 and buying a upgrade kit... thanks for the offer though

[NMay]

We are looking for a series 3 version now. Not interested in a series 2 and buying a upgrade kit... thanks for the offer though

No worries

[Jsteele75]

Still looking to purchase now.. willing to travel to pick up. Thanks

[Jsteele75]

Still looking to purchase now.. willing to travel to pick up. Thanks

[Steve Seebold]

Still looking to purchase now.. willing to travel to pick up. Thanks

BUY A NEW ONE.

You're wasting your time and losing money waiting for a used machine.

People who have them and like them (like me) aren't about to let them go.

[Jsteele75]

BUY A NEW ONE.

You're wasting your time and losing money waiting for a used machine.

People who have them and like them (like me) aren't about to let them go.

Thanks Steve for your concern... but new is not within my budget at the moment

[dneisler]

I might have one for sale....PM for details.

Quick List....
Tormach PCNC 1100 Series 3
Deluxe Stand
Power Draw Bar
Tormach Enclosure
4 Axis Driver
8" Rotary Table
3 Jaw Chuck
4 Jaw Chuck
Tail Stock
5C Adapter for Rotary Table
5" Tormach Vise
4" Glacern Vise
Serveral Sets of Monster Jaws
Upgraded 1/3 HP Coolant Pump
External Contactor Kit for Coolant Pump Interface
Tormach Machine Controller
Mesa Card w/ PathPilot
CD with Mach3 w/ License
Machine Arm w/Monitor, Keyboard
Shuttle Jog Controller
Dell 17" Monitor
Lifting Device
Many - End Mill Holders
Many - ER 20 Collet Holders
Many - Small Drill Chucks
3 - Large Drill Chucks
Modular Tapping Kit w/Collets
Small Tapmatic
Larger TapMatic
1.5" Face Mill w/steel & Aluminum Inserts
TTS Touch Tool w/Digital Indicator
1/2" Shank Edge Finder
Passive Probe
Machinist Parallels


Manual w/CD's

Spare parts - Never had a issue though.
Extra Break Out Board
3 Extra Stepper Drivers

[Jsteele75]

[QUOTE=dneisler;1769526]I might have one for sale....PM for details.

Quick List....
Tormach PCNC 1100 Series 3
Deluxe Stand
Power Draw Bar
Tormach Enclosure
4 Axis Driver
8" Rotary Table
3 Jaw Chuck
4 Jaw Chuck
Tail Stock
5C Adapter for Rotary Table
5" Tormach Vise
4" Glacern Vise
Serveral Sets of Monster Jaws
Upgraded 1/3 HP Coolant Pump
External Contactor Kit for Coolant Pump Interface
Tormach Machine Controller
Mesa Card w/ PathPilot
CD with Mach3 w/ License
Machine Arm w/Monitor, Keyboard
Shuttle Jog Controller
Dell 17" Monitor
Lifting Device
Many - End Mill Holders
Many - ER 20 Collet Holders
Many - Small Drill Chucks
3 - Large Drill Chucks
Modular Tapping Kit w/Collets
Small Tapmatic
Larger TapMatic
1.5" Face Mill w/steel & Aluminum Inserts
TTS Touch Tool w/Digital Indicator
1/2" Shank Edge Finder
Passive Probe
Machinist Parallels


Manual w/CD's

Spare parts - Never had a issue though.
Extra Break Out Board
3 Extra Stepper Drivers[ sent... thanks



PM sent...

[mioduz]

I have a series 3 machine for sale. Has just about every option you can think of.
Atc
Super saver 8“ 4th axis
Enclosure
Path pilot
Probe
Spindle speeder
Tons of tts tooling
Upgraded coolant pump
Etc etc
Email [email protected]
If interested

Sent from my SM-G900V using Tapatalk