Have been doing real well in setting up my console, but hit a snag connecting the Xylotex XS-3525/8S-1 board to the Stepper that came with the board. The stepper is a Powermax II, Mod: P21NSXCLSS-N-S-DS
The stepper has four leads, RED (1-2), BLACK (3-4), WHITE (5-6) AND GREEN (7-8) leads.
The drawing of the board is labeled " B#, B, A, A#". Cannot find how this relates to the connections on the stepper in the "Standard Pinout Information" for the board.
See attached drawing.
Thanks
Hager
Results 1 to 3 of 3
-
10-24-2006, 02:20 AM #1
Member
- Join Date
- Sep 2003
- Posts
- 1472
Connection Between Xylotex Board and Stepper Motor
-
10-24-2006, 02:38 AM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
See page 52 here http://www.xylotex.com/PacSciDS.pdf
Looks like:
5&6=A
1&2=A#
8&7=B
3&4=B#Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
10-24-2006, 06:07 AM #3
Member
- Join Date
- Sep 2003
- Posts
- 1472
Thanks
Originally Posted by ger21
It shouldn't be this difficult.
Reply With Quote
Posting Permissions
