New to website and new to CNC repair. Apologize ahead of time.

Have Wasino LF-103M with a FANUC 10T controller. On power-up, it gives the IPL menu and the following--> CHECK SYSTEM LABEL: ERROR.

Other threads say to backup (or record by hand) the following: [1] certain addresses (9000, 9100-9132) and [2] the system parameters (timers, keeper relays, etc.) Then, clear memory and re-initialize.

Unfortunately, I only appear to have access to the IPL menu. I can dump the memory locations mentioned above and write down their values. But I'm not sure how to retrieve the system parameters.

The little documentation I do have does not indicate how. Nor am I able to get to a menu function that allows me to write things to a PC. Needless to say, I do not have a good, known list of the system parameters.


I would appreciate any assistance. Thanks.