587,040 active members*
2,905 visitors online*
Register for free
Login

Thread: fanuc driver with Mach or ???

Results 1 to 3 of 3
  1. 03-01-2015, 11:34 AM #1
    wili18
    wili18 is offline Registered
    Join Date
    Apr 2011
    Posts
    1

    fanuc driver with Mach or ???

    Hallo, please advice, I gained servo driver FANUC A06B-6050-H102. I have manual but it is big for attachment. This can be controlled with Mach 3 software? if so, what it could be controlled from the PC?
    Sorry if this was already solved this problem, I not found similar theme for my bad English. If yes please direct me. Thank you
    Reply With Quote Reply With Quote
  2. 03-01-2015, 04:30 PM #2
    Al_The_Man's Avatar
    Al_The_Man
    Al_The_Man is offline Community Moderator
    Join Date
    Dec 2003
    Posts
    24223

    Re: fanuc driver with Mach or ???

    IIRC this has a analogue input control, Mach is step dir.
    Al.
    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.
    Reply With Quote Reply With Quote
  3. 03-01-2015, 04:38 PM #3
    ger21
    ger21 is offline Community Moderator
    Join Date
    Mar 2003
    Posts
    35538

    Re: fanuc driver with Mach or ???

    You can use analog servo drives with Mach3 if you use a CS Labs CSMIO-IP/A or a Vital Systems DSPMC.
    Both are quite expensive.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Mach 3 - Driver Test results VMWare player (XP -> Mach 3)
    By itolond in forum Machines running Mach Software
    Replies: 1
    Last Post: 04-07-2014, 01:32 PM
  2. pci card and basic driver mach 3 old server
    By Shortdog in forum Mach Software (ArtSoft software)
    Replies: 0
    Last Post: 06-04-2012, 02:23 AM
  3. Mach 3 driver config file
    By Drakkn in forum Mach Software (ArtSoft software)
    Replies: 6
    Last Post: 08-10-2007, 08:17 PM
  4. Servo motor, step/dir driver and Mach.
    By Darc in forum Mach Mill
    Replies: 0
    Last Post: 04-11-2006, 06:23 AM
  5. Mach Driver test => Max 23,800Hz
    By haysys in forum Mach Software (ArtSoft software)
    Replies: 3
    Last Post: 12-18-2005, 08:12 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules