[totalhack]

Does anybody have a post processor for mastercam x6 that I can have or can anybody tell me if they have successfully used x6 with their tormach machine?

I hope I am not beating a dead horse here but I searched the forum and the only thing I can find is reference to a mastercam post that is available for download from the tormach site or from the mach3 site and those files are from 2007. I called tormach and they could not tell me one way or another if their post file would work with x6.

Any help would be greatly appreciated.

Edit - Doing a little more research on the Mastercam site I found that they offer post files for version X5 for free. Here is the link

http://www.mastercam.com/teachersstu...s/Default.aspx

[Freddy Bastard]

I've done posts for all versions of Mastercam. It's in the file section on the Tormach Yahoo group.
Fred

[usarty1]

Hi Fred,

Do you have a post processor that works with Mastercam X8 for the PNC 1100? I have been searching here but no luck and Tormach pointed me here to CNC?
Kind Regards,
John

[hall6ppc]

Hi Fred,

Do you have a post processor that works with Mastercam X8 for the PNC 1100? I have been searching here but no luck and Tormach pointed me here to CNC?
Kind Regards,
John

Just use the "Migration wizard " in Mastercam X8 to update the older post (..... X5,X6,X7) . Works great .

[BIG IGG]

That was the ONLY thing i migrated. Our X8 was so messed up at work, i did not want anything to do with 8 to 9