Hi all,
I have a Bridgeport Discovery 300 (same as a 308 w/o tool changer). I converted to it Mach3 (with Galil DMC) and it's working great... then the drawbar fractured and I'm out of biz until it's fixed(ahhhhhh!)
I called the factory, no luck.
It's 35cm long, 14mm diameter
P/N BP 62402849
Ball type gripper (6mm steel balls).

Attachment 265156

Any ideas where I can get one, or someone that can make one? Looks like hardened steel. :-(
Thanks!
Scott (at) kenatic (dot com).