Hello all, i am very raw when it comes to CNC Lathes as i have been programming and operating CNC Mills for 12 years. The new company i am at currently has an LB-15 with a 12" chuck on it and i am trying to get some info to get a Hardinge 25C adapter assembly. My questions are, where do i find the actuator manufacturer? Draw Tube / Bar Thread left or right hand and internal or external? Distance from Front of Spindle to Front of Draw Tube / Bar when Forward and Retracted? And also i believe it has an A2-6 Spindle but one thing that threw me for a loop was our draw tube ID is 2.562" and in the specs all i can find are that it should be 2.200". Any help would be greatly appreciated.
Thread: 1991 LB-15 QUESTIONS
Results 1 to 3 of 3
Threaded View
-
12-19-2014, 03:37 PM #1
Registered
- Join Date
- Oct 2013
- Posts
- 2
1991 LB-15 QUESTIONS
Reply With QuoteSimilar Threads
-
1991 VF1 RS232 Problems
By lovell110 in forum Haas MillsReplies: 11Last Post: 02-19-2020, 03:20 PM -
Looking at a 1991 VF1 possible purchase
By speed33317 in forum Haas MillsReplies: 4Last Post: 04-29-2014, 02:58 PM -
1991 leadwell vmc..what do I look for as far as wear?
By acannell in forum Maintenance DIY DiscussionReplies: 2Last Post: 03-26-2013, 08:12 PM -
1991 QT.15N
By dcchip in forum Mazak, Mitsubishi, MazatrolReplies: 0Last Post: 01-08-2011, 10:24 PM -
Help with 1991 VF1?
By david bright in forum Haas MillsReplies: 3Last Post: 07-20-2007, 12:27 PM
Tags for this Thread
Posting Permissions
