586,179 active members*
2,909 visitors online*
Register for free
Login

Thread: G91.1

Results 1 to 4 of 4
  1. 03-14-2015, 09:58 PM #1
    JakeHappiness
    JakeHappiness is offline Registered
    Join Date
    Nov 2014
    Posts
    61

    G91.1

    Hi Tom,

    My CAM really wants to use G91.1 any plans to add support for it in KmotionCNC?

    Jake
    Reply With Quote Reply With Quote
  2. 03-14-2015, 10:15 PM #2
    mactec54
    mactec54 is offline Member
    Join Date
    Jan 2005
    Posts
    15362

    Re: G91.1

    JakeHappiness

    It does not matter if it is in your program,it's not needed if the control is set up correct, this would be just a change in your cam post processor to remove it, if it is not needed
    Mactec54
    Reply With Quote Reply With Quote
  3. 03-15-2015, 05:24 PM #3
    TomKerekes
    TomKerekes is offline Junior Member
    Join Date
    May 2006
    Posts
    4045

    Re: G91.1

    Hi Jake,

    This issue has came up a few times but we are yet to have a case where the CAD system was not easily switched to incremental IJK mode. It seems that your CAD prefers this as well. As Macteck54 states you just need to have your CAD post processor remove the G91.1 code.

    Let us know if you are not easily able to do this.

    Regards
    TK
    http://dynomotion.com
    Reply With Quote Reply With Quote
  4. 03-16-2015, 01:42 AM #4
    JakeHappiness
    JakeHappiness is offline Registered
    Join Date
    Nov 2014
    Posts
    61

    Re: G91.1

    Thanks!
    Jake Kittell
    Happiness Tech llc http://happinesstech.biz
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules