When starting the machine, both the crt's don't come on. The manual says to check the fuses for the control panel. I took the covers off the control panel and cannot see any fuses in there. The machine was manufactured in the late 80's. I have been able to repair the machine every time it acted up. I had started the machine earlier in the day and went to use it several hours later with my current problem. If you can help thanks in advance.
Steve Paul
Later in the day I tried the machine and the CRT's came on. I had touched some of the connections in the controll panel checking for good connections. It also was a very rainy day. Now the machine is running but won't accect a file trasfer from my computer. I use Mastercam's communicater software to send the G-code to the machine. I tried plugging into the other port on the machine but got the same result.