Just playing around here with some lighting indicators in the shop and though it might be cool to be able to slip DPRNT lines into part programs that would output to arduino type controller to be interpreted and used to control and light indicator system, i.e., this program is 0-100% done. The arduino could output to a lcd, or even an led light bar to show progress that could be seen from a distance.
Anyone ever dabbled in this type of communication via RS232 from the Haas control to any external device?
Results 1 to 2 of 2
-
02-26-2015, 06:34 PM #1
Registered
- Join Date
- Nov 2014
- Posts
- 2
Haas RS232 Data Ouput to external micro controller
-
02-26-2015, 08:35 PM #2
Registered
- Join Date
- Sep 2007
- Posts
- 100
Re: Haas RS232 Data Ouput to external micro controller
I have not done what you are proposing, but we do use M51-M58 to activate the optional M-Code Relays.
External devices can be controlled from within a program in this way.
Look in your user manual in the M-Code section for a description. Also see M21-M28 and Optional 8M-Code Relays.
Reply With QuoteSimilar Threads
-
Utilizing the external RS232 port
By pa2262 in forum Haas MillsReplies: 2Last Post: 04-10-2014, 11:12 PM -
Capture probe data from rs232 port?
By REVCAM_Bob in forum FadalReplies: 24Last Post: 07-31-2012, 12:02 AM -
USING RS232 DPRNT W/DATA SERVER (18)
By marcwdci in forum FanucReplies: 8Last Post: 03-29-2010, 05:36 PM -
Haas dprint to external computer???
By mt92 in forum Haas MillsReplies: 1Last Post: 09-01-2009, 06:23 AM -
Haas 4th axis external drive
By tecko in forum Haas MillsReplies: 1Last Post: 06-07-2007, 10:23 PM
Tags for this Thread
Posting Permissions
