I'm wanting to machine arcs around the OD of cylinders; using a Fagor 8055T, Version 08.11 .
The endmill is on the Y axis.
The manual that I have is for a Fagor 8050T rather than the 8055T and only shows line segments with a blend radius using R36 R. It doesn't show anything about G7.1/ G107 or arcs.
Is it possible to machine radius' around the OD of a cylinder on a Fagor 8055T? How would I do that?
Just using the G15 R, G16 ZC, G02/G03 Z C R format doesn't seem to work.




thanks,
Tim