[lenny09]

What are the MTM post definitions????

For example:

Fanuc 6M [VG] NYIRM299.19.pst

N – This designates a mill post that does not use subprograms. This is known as a "Long Hand post". Subprograms are frequently used for multi-process drilling, Z-repeat milling, patterns, thread milling, rough & finish mill bore, multiple parts, etcetera. Any mill post can be modified into a Long Hand post.
Y - This designation is for a 4-axis Mill/Turn machine that has a linear Y-axis.
I - This designates a Mill/Turn post that supports Polar and Cylindrical Interpolation. A Polar and Cylindrical Interpolation Mill/Turn post will output a G2 or G3 with rotary moves.
R – This designates a 4th axis Rotary Mill post. A Rotary Mill post will output an A-axis move in the G-code. Cutting of wrapped arcs will be broken into linear segments. No Work Fixture Offsets will be used in the rotation of the part.
M – This designates a regular 2- or 3-axis mill post. A 3-axis mill post has 3 linear axes (X, Y, and Z) that can position and cut simultaneously.



Or Does any one have one will trade a post for a post.



Thanks!!!

[peaceandcalm]

HI, you will need a Mdd and VMM made for the MTM post...I am looking for a 5 axis post for Okuma MB-56VA..what machine you looking post for?

[lenny09]

I am looking for a post for a Doosan Puma 300.
1 turret with live tooling,2 spindles & parts catcher.

I think I do have one


Email me: [email protected]

[peaceandcalm]

sent you email..check your junk mail if not recieved in inbox.