Re: Will the Electronics Kit 4.3 Work With Linux?
Hi Mike,
The steppers in that kit really need around 96VDC to run at full speed and torque, so with a 36VDC PSU, you'll need to lower the feed and rapid rates so the really high inductance doesn't kill the torque. The way to work out what rating PSU is needed is ((square root of the inductance) times 32).
Apart from that, very good pricing on the kit, especially as it's much more complete than most you see.
cheers, Ian
It's rumoured that everytime someone buys a TB6560 based board, an engineer cries!