from what i gather so far on a cnc router/mill i need a spindle motor of at least 800W and a repeat tolerance of no more than .01 Will be used for wood, plastic, aluminum, silver. What would be some other min specs to look for.
from what i gather so far on a cnc router/mill i need a spindle motor of at least 800W and a repeat tolerance of no more than .01 Will be used for wood, plastic, aluminum, silver. What would be some other min specs to look for.
Smaller spindles tend to use collets with a smaller capacity. Make sure the collets can hold the largest tools you'd want to use.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)