Hi!
Control: Fanuc 21M
Rotary Table : Golden Sun 251R
Machine: Leadwell V40A
Because of thunderstorm we did lost our parameters.
I was able to recover all other but not 4th axis data, because that was installed later ( and i did not take backup when it was installed).
Option parameteres should be ok, because machine was originally with 4th axis card.
What parameter i should change ?
Results 1 to 4 of 4
Threaded View
-
09-22-2014, 03:04 PM #1
Registered
- Join Date
- Sep 2006
- Posts
- 222
Golden Sun Rotary table on FAnuc 21M
Reply With QuoteSimilar Threads
-
Can I add true 4th (5th??) axis rotary table to Mazak H-10/H-25 with Fanuc 6MB?
By serickson in forum Mazak, Mitsubishi, MazatrolReplies: 0Last Post: 04-23-2013, 05:13 PM -
Adding a rotary encoder to a large Rotary Table
By small.planes in forum Mechanical Calculations/Engineering DesignReplies: 14Last Post: 04-27-2012, 07:27 PM -
Rotary Table Installation on Fanuc 11m Machining Center
By ixoxi999 in forum FanucReplies: 0Last Post: 03-31-2010, 09:13 AM -
Rotary Table Interface on Fanuc OM/C: Do I need new firmware?
By inthezone in forum CNC Machine Related ElectronicsReplies: 1Last Post: 10-16-2008, 08:30 PM -
Golden Sun rotary table
By Green Button in forum CNC (Mill / Lathe) Control Software (NC)Replies: 0Last Post: 11-26-2006, 12:52 PM
Tags for this Thread
Posting Permissions
