Handheld Digital Photo Laser Tachometer Non Contact Tach Tool RPM Tester | eBay
Wondering if its even worth that price. Need to calibrate my lathe index sensor and trying not to spend $200+.
Carl
Results 1 to 3 of 3
-
09-23-2014, 07:34 PM #1
Registered
- Join Date
- Jan 2011
- Posts
- 141
Has anyone used one of these cheap handheld tachs?
-
09-23-2014, 08:23 PM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24223
Re: Has anyone used one of these cheap handheld tachs?
I have one, they do a really good and accurate job, I have found.
The only down side I found out is that if you leave the battery in the unit connected, it drains the battery quickly over a month or two, it must have an on button sensor that it active even when off.
So the moral is to discconect after use.
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
-
09-23-2014, 08:28 PM #3
Registered
- Join Date
- Jan 2011
- Posts
- 141
Re: Has anyone used one of these cheap handheld tachs?
Cool, thanks Al.
Reply With Quote
Similar Threads
-
Looking for Handheld pendant
By wickedboysap in forum Multicam MachinesReplies: 4Last Post: 05-03-2011, 05:51 PM -
New handheld pendant for Mach3...
By florins in forum Mach Software (ArtSoft software)Replies: 54Last Post: 11-16-2010, 04:53 PM -
add on a handheld control
By cnc forum in forum Mechanical Calculations/Engineering DesignReplies: 0Last Post: 08-25-2005, 01:09 AM -
Handheld Plasma Cutter with CNC?
By Jim Stein in forum Waterjet General TopicsReplies: 5Last Post: 08-28-2004, 03:41 PM
Tags for this Thread
Posting Permissions
