I've searched the posts here and looked through the information I could find from Bobcad and couldn't find out how to get the post to add 20 to the d-offset. I have a 18 tool changer and I add 20 to whatever tool number is in the spindle. I know this should be easy but it isn't obvious, at least to me. Any help would be appreciated.
Results 1 to 2 of 2
-
09-12-2014, 01:46 AM #1
Member
- Join Date
- Jun 2003
- Posts
- 242
Getting the post to add 20 to the cutter comp offset
-
09-12-2014, 01:55 AM #2
Member
- Join Date
- Jun 2003
- Posts
- 242
Re: Getting the post to add 20 to the cutter comp offset
After I posted The Engine Guy in the first thread in the similar threads answered my question.......267. Amount to add to tool # for tool register value? 20
Reply With QuoteSimilar Threads
-
Can't post with cutter comp
By b42000 in forum BobCad-CamReplies: 9Last Post: 05-14-2014, 11:59 PM -
Cutter Comp error with post proccessor
By Harley95 in forum FeatureCAM CAD/CAMReplies: 3Last Post: 03-04-2014, 02:09 PM -
Haas mill stops moving when using tool offset and cutter comp
By Machining in forum Haas MillsReplies: 5Last Post: 12-16-2013, 12:58 AM -
Post for Haas with cutter comp?
By mwestvang in forum RhinocamReplies: 0Last Post: 04-30-2011, 05:21 PM -
Cutter Comp in Haas post
By helocat in forum Haas MillsReplies: 3Last Post: 06-21-2010, 12:39 PM
Tags for this Thread
Posting Permissions
