Hi,
We have 2 x 36V 10Amp power supplies (not at the same time) to run 3 x Nema 23's.
Untill recently they ran without issue, but a couple of days ago when one blew an internal fuse. We replaced, and again within minutes it blew.
We then replaced it with the other power supply, which ran fine for a couple of days and now this one has blown a fuse too.
We opened both of them up, and tested with new fuses and nothing else connected. Both blew, with sparks coming from the same component on both, the rectifier (D10XB60).
Has anyone else had any issues like this before?
Results 1 to 3 of 3
Threaded View
-
09-15-2014, 08:39 PM #1
Registered
- Join Date
- May 2014
- Posts
- 7
Two different power supplies keep blowing fuses
Reply With QuoteSimilar Threads
-
Keep blowing fuses
By bujaman in forum Maintenance DIY DiscussionReplies: 2Last Post: 01-29-2014, 07:26 PM -
Power Supplies and drivers, what fuses and holders are you useing?
By skyguynca in forum CNC Machine Related ElectronicsReplies: 2Last Post: 10-04-2013, 04:26 PM -
KL- 7220 Power Supply Blowing Fuses
By MRM RCModels in forum Automation Technology ProductsReplies: 5Last Post: 03-17-2009, 03:33 PM -
Blowing fuses
By kaderick in forum CNC Machine Related ElectronicsReplies: 2Last Post: 12-05-2006, 06:34 PM -
Blowing the fuses
By rocks101 in forum Hobbycnc (Products)Replies: 2Last Post: 02-26-2005, 10:00 AM
Tags for this Thread
Posting Permissions
