Hi,
we have a mazak nexus 350 MY lathe that we program in iso format using edgecam 2014 r1.I did a program and wanted to deburr some pcd holes using a 16mm 90 deg spot drill that i had also used to spot drill another set of pcd holes in the same program (one tool to do 2 different ops).

This was fine in edgecam (see attached avi-avi too big see image instead) but the path it took on the machine was as attached image.
I am new to this machine but as I understand there is tool data that is entered by the operator on the machine to describe the driven tools.I am told by our senior programmer that even if you are not using comp (eg, G41/42) this data still influences the program result ?
any mazak experts that can tell me what we need to do ?
Thanks.