Want to put facing prior to engraving
Results 1 to 6 of 6
-
08-26-2014, 06:15 PM #1
Registered
- Join Date
- Jan 2009
- Posts
- 77
How to re-arrange order of tool paths in V-25
-
08-26-2014, 08:03 PM #2
Gold Member
- Join Date
- Apr 2009
- Posts
- 3376
Re: How to re-arrange order of tool paths in V-25
Just drag the feature where you want it.
-
08-26-2014, 10:03 PM #3
Registered
- Join Date
- Jan 2009
- Posts
- 77
Re: How to re-arrange order of tool paths in V-25
Tried that, will only go back to where it was, shows circle with line through it symbol (like Euro road sign for do not enter)
-
08-26-2014, 10:16 PM #4
Gold Member
- Join Date
- Apr 2009
- Posts
- 3376
Re: How to re-arrange order of tool paths in V-25
-
08-27-2014, 03:21 AM #5
Registered
- Join Date
- Jan 2009
- Posts
- 77
Re: How to re-arrange order of tool paths in V-25
Tried it again, and after minimizing the tool path was able to get it to switch around. Seems finicky, but it did work, thanks
-
08-27-2014, 03:27 AM #6
Registered
- Join Date
- May 2013
- Posts
- 701
Re: How to re-arrange order of tool paths in V-25
As JRmach showed, the features in the Cam Tree are collapsed not expanded. It does make it work much better.
Reply With QuoteSimilar Threads
-
help with surface tool paths
By chineshop_guy in forum MastercamReplies: 19Last Post: 07-03-2012, 04:31 AM -
offsets for tool paths
By acidcustom in forum AutodeskReplies: 14Last Post: 05-30-2007, 08:35 AM -
Rotary tool paths
By DAB_Design in forum MastercamReplies: 1Last Post: 03-31-2005, 08:27 PM -
3d tool paths
By ginamc in forum OneCNCReplies: 5Last Post: 03-19-2005, 06:17 PM -
Tool Paths
By WOODKNACK in forum G-Code ProgramingReplies: 7Last Post: 04-27-2003, 02:09 AM
Tags for this Thread
Posting Permissions
