While operating my 8760 I accidentally jammed the x axis and blew the fuse on the 8760 controller.
I replaced the fuse and now the indicator light on the front panel blinks on and off and the X axis does not work . I rechecked the fuse and it is operating fine.
Also, The Y axis only works in one direction and the Z and A axis are both fine and operating normally.
I am running mach3 and the Dro on the Y moves in both directions , X does not move at all.
Can anyone out there help me out with this??????????
Ron
Thread: Sherline 8760 4 axis controller
Results 1 to 2 of 2
-
08-18-2014, 07:40 PM #1
Registered
- Join Date
- Sep 2011
- Posts
- 8
Sherline 8760 4 axis controller
-
08-18-2014, 09:08 PM #2
Member
- Join Date
- Apr 2004
- Posts
- 5742
Re: Sherline 8760 4 axis controller
It sounds like you damaged your control box, and probably burned up the X axis driver. I'd suggest you contact Sherline about a repair.
Reply With QuoteSimilar Threads
-
FS - Sherline 5000 3 Axis CNC Mill w/8760 Driver Box
By pepperwood in forum For Sale OnlyReplies: 0Last Post: 06-25-2014, 12:49 AM -
CNC servo controller kit (FlashCut) for Sherline, Taig, Ma
By art4x4 in forum Benchtop MachinesReplies: 0Last Post: 02-25-2012, 10:19 PM -
Spindle speed control with Sherline controller
By RobH in forum Mach LatheReplies: 4Last Post: 12-18-2009, 02:49 AM -
Replacing controller on Sherline/Light Machine
By jayhawklawrence in forum Mini LatheReplies: 3Last Post: 03-15-2008, 07:20 AM -
Free adapter to Sherline P/N 8760 Driver Box
By Torchhead in forum News AnnouncementsReplies: 0Last Post: 09-12-2006, 07:35 PM
Tags for this Thread
Posting Permissions
