We have a Kira VTC30a with a Fanuc 21i-MA controller. Recently, when we turn it on in the morning, it would turn on for half a second and then reboot, and then repeat. Once in a while it shows "Graphics ready" and on the bottom says "Boot Rom Parity. Please Power Off." This shows for half a second before it reboots. After a while, it is able to boot up normally and we run it for the rest of the day, until we power off and on and the issue occurs again. But this can take anywhere from 15 minutes to hours or days and we are down a machine for an unknown period of time. Here is a video of what it looks like. Thanks for taking a look and any help or suggestions is greatly appreciated!