I inherited these two vacuums and I'm trying to get one good one from the two. The one on the right was totally frozen. I suspect the surface rust has ruined it. The one on the left works, but it doesn't seam to be pilling much. There is air coming from the outlet when running. I need a rotary vane vacuum pump 101 course. Can anyone shed some light on these?
Thomas Model TA-0075-V Part 991091
Attachment 235324
Results 1 to 2 of 2
-
05-07-2014, 10:57 PM #1
Registered
- Join Date
- Aug 2008
- Posts
- 62
Help testing and repairing Thomas rotartry vane vacuum for my molder...
-
05-09-2014, 04:43 PM #2
Registered
- Join Date
- Aug 2008
- Posts
- 62
Re: Help testing and repairing Thomas rotartry vane vacuum for my molder...
Well I finally found Welch bought Thomas and they repair them. I'm waiting to see the cost of repair. What are others using for a high vacuum pump? Would it be worth the trouble to make a reservoir for the system with only a 15" x 20" table? Help me people I need to get this system working.
Reply With QuoteSimilar Threads
-
thomas polano leasing newbie here.
By agmamakong in forum Hobby DiscussionReplies: 0Last Post: 12-07-2012, 12:49 PM -
Drag force testing m/c/Friction factor testing m/c/Rotational resistance testing m/c
By chaitanya2102 in forum Want To Buy...Need help!Replies: 0Last Post: 03-08-2011, 12:28 PM -
vane vs vac??
By shnitzel in forum DIY CNC Router Table MachinesReplies: 1Last Post: 11-18-2010, 07:49 AM -
5 Vane Impelar
By rpicker1 in forum Uncategorised MetalWorking MachinesReplies: 1Last Post: 05-11-2004, 02:23 PM
Tags for this Thread
Posting Permissions
