Hey guys, i am having some trouble on missing steps with my cnc machine,it have 3 axes, 23nema stepper motor, tb6560 driver board and mach3 to run, so i have been reading that this driver board is very problematic, poor engineered, so i am getting missing steps when using a feed of 1000mm/min+ (40ipm+), i am using the 1/16 microstep setting, 50% decay mode and 75% of current, one guy i know recommended to me to use a power grid stabilizer of 2kVA that it would up the feed a good amount, but i am not very confident to it, so i am thinkin to buy a gecko driver board because i have seen some video and threads saying its a good board to get speed and use a usb-to-parallel cable to connect to a laptop that have a lot more processing power than the cpu that its currently running, what you guys think ? i am not an expertice in eletronics so all that capacitor thing its out of my league