We bought this colchester which was in good running order but was not running for some time. I know for sure that it had no problems.
I had powered it up checked no alarm on drive, could jog axis tried nothing else.

After it was thoroughly dismantled, cleaned and painted, and of course reassembled it was powered on.
Had battery faults- Replaced
Had disconnection faults all sorted and machine boots up with no problems.
I can jog the machine x and Z and that is how far I can go with it.
I have an alarm 6 on the drive as well now.... but that I will look into it afterwards.
I cannot move the machine axis, nor select turret tools with MDI.
Can somebody guide me accordingly
Thanks for any leads