586,570 active members*
3,538 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Bridgeport Machines > Bridgeport / Hardinge Mills > Bridgeport interact 308 / TNC2500 keeps Tripping out

Thread: Bridgeport interact 308 / TNC2500 keeps Tripping out

Results 1 to 2 of 2
  1. 07-17-2014, 04:40 PM #1
    russellpalmer47
    russellpalmer47 is offline Registered
    Join Date
    Sep 2013
    Posts
    4

    Bridgeport interact 308 / TNC2500 keeps Tripping out

    Hi all

    i have a interact 308 that was running a program, basically the z axis started moving up and "trip" whole machine switches off and the 20AMP trip in the panel was gone

    bit of digging and MEGA the Z motor, and down to earth

    Motor back from being refurbed and tested as working 100% so plug it back in and switch on, comes up memory test, press CE then asks to reference, press the orange drive button to energise the drives and motor etc and it trips out

    swapped the Z drive for another working one and it trips again

    any ideas on where to look next??

    thanks all

    Rus
    Reply With Quote Reply With Quote
  2. 07-18-2014, 01:27 PM #2
    cncfixxer
    cncfixxer is offline Registered
    Join Date
    Oct 2013
    Posts
    57

    Re: Bridgeport interact 308 / TNC2500 keeps Tripping out

    Encoder went south ... replace it
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Bridgeport Interact 2 Series 2 TNC2500
    By theo1 in forum Bridgeport / Hardinge Mills
    Replies: 5
    Last Post: 01-22-2013, 07:29 PM
  2. Bridgeport Interact Series 1 TNC2500-Water in Spindle Advice?
    By xxcar2 in forum Bridgeport / Hardinge Mills
    Replies: 3
    Last Post: 10-31-2012, 07:29 AM
  3. interact 1 mk2 with tnc2500
    By robinhood2b in forum Bridgeport / Hardinge Mills
    Replies: 3
    Last Post: 06-19-2008, 10:16 PM
  4. Bridgeport Interact 308 w/TNC2500
    By GarageShop in forum Bridgeport / Hardinge Mills
    Replies: 4
    Last Post: 03-24-2008, 11:43 AM
  5. anyone need interact 4 electronics? TNC2500
    By camarogod98 in forum Bridgeport / Hardinge Mills
    Replies: 1
    Last Post: 01-31-2007, 10:48 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules