Can anyone tell me how to clear a T0000 tool in the spindle on a Leblond-Makino Fanuc OM? It's keeping track of tools in magazine, but I get a NO 2012 Spin T-Code Lost when doing an M6. I have exhausted all efforts to clear this or set the machine to a different tool number.
Results 1 to 3 of 3
-
06-21-2014, 03:47 PM #1
Registered
- Join Date
- Aug 2007
- Posts
- 8
Clearing T00 on Leblond Makino Fanuc OM
-
06-21-2014, 05:21 PM #2
Gold Member
- Join Date
- Feb 2009
- Posts
- 6028
Re: Clearing T00 on Leblond Makino Fanuc OM
Do you have the makino manual? I used to have to do this all the time on ours when someone put the tool in backwards. Had to change a diagnostic bit in the control, that much I remember.
sent from me
-
06-21-2014, 05:48 PM #3
Registered
- Join Date
- Aug 2007
- Posts
- 8
Re: Clearing T00 on Leblond Makino Fanuc OM
No I don't have a manual for the OM control. This is really messing me up if anyone can advise on a fix
Reply With QuoteSimilar Threads
-
LEBLOND MAKINO, FANUC 11M ATC CONTROLLER.
By GPena in forum Uncategorised MetalWorking MachinesReplies: 1Last Post: 05-08-2016, 03:54 PM -
Fanuc 10T ladder with cross reference for LeBlond makino
By ivanjaramillo in forum RFQ FeedbackReplies: 2Last Post: 08-01-2013, 04:36 AM -
Leblond Makino Lathe with Fanuc 10t parameters
By Lohmeyer in forum FanucReplies: 1Last Post: 06-02-2011, 07:54 PM -
Leblond/Makino FNC 74 w/Fanuc 6M
By bigsuperbig in forum Uncategorised MetalWorking MachinesReplies: 4Last Post: 11-06-2009, 06:43 AM -
Leblond Makino (fanuc OM) Problem
By Masood in forum FanucReplies: 6Last Post: 09-22-2006, 07:55 AM
Tags for this Thread
Posting Permissions
