Hello everyone. I'm Khoa from Vietnam. After being interested in CNC for a while and having build two CNC Cframes from weld steel and used cast iron parts. I'm having me time to build a small milling machine for miniature works.
The machine travel X,Y,Z is 6x12x10".
Here is its linear rails-THK SHS20:
and 2005 double nut screws:
BT30 used spindle have been taken out from a taping machine.
1.1KW Grundfus motor.
The couple:
I will use ASM66AC-N5 and N10 for XYZ axis and ASM98AC-H100 for A axiss.
Here is the design:
Side view:
Front view:
3/4 view:
The color of this machine will be pinky like a lovely Dinah.
This structure is used for modifing the right angle between Z and XY axis.
After it's finished, all the empty parts will be filled by epoxy to make it more rigid. This machine weight is about 800 lbs.
X, Y are made from 1" weld steel. Z is used iron casting bed.
Here is some pictures of the making process:
Here is steel for X table :
And the accident:
Thanks for reading. I will post more pictures about this build log while I make it.