Hi all

I'm new to Laser (built and using CNC router for years)
I've just bought the chineese 50w 30cmx50cm laser machine.

It came with RDCAM V8
but the manual on disk is V6, the printed one is V3 !

I'm after a copy of the manual for V8, to match the software.

If not .. 1st question, vector cutting
Double click layer
set speed and power
set "cut"
At the bottom is a box to select cut through...

All the above is in the manual

But .. under that check box is another "through cut power" which defaults to 50%

This isn't mentioned in the old manuals, so I'd like to know the effect this variable has on the output cut.

Thanks in advance
Rich