Hey

I am new to using G112 and would like a second opinion on some code. Just a little reassurance or opinions to build my confidence and understanding on how it works. I have to mill a round hub 6.313mm off of center. This hub is 25.35mm in diameter and 16.28mm long.

Does this look right?
G21G99
G54G40
G0T0303
G50S3500
G0Z0S300
M86
G97M88S2500
G0X50.0
G0Z-16.28
G112
G98G1G42X37.975C0.0F1000.0
G3C12.675X12.625R12.675
G3C0.0X-12.725R12.675
G3C-12.675X12.625R12.675
G3C0.0X37.975R12.675
G1X50.0
G1G40X62.0
G113
G28U0

Thanks.