Can dovetails be done using Bobcad. I mean is there a canned setup for dovetails. Is there anything for doing Dovetails in Bobcad
Thank You
Don
Can dovetails be done using Bobcad. I mean is there a canned setup for dovetails. Is there anything for doing Dovetails in Bobcad
Thank You
Don
The time has come the woodworker said to speak of many things. 0f routers and Wood , chips and paints and stains and CNC and other things.
Nothing cooked into the system. You'll basically need to crunch the numbers and program it yourself. There are some dedicated dovetail programs out there, like the one Jerry Burks has written: http://www.cnczone.com/forums/diy-cn...-software.html
And Ger21 is working on one, but it's not finished.
Luke
"All I'm trying to find out is the fellow's name on first base" -- Lou Costello
I have looked at Jerry Burks and it looks good. I think I will see what Ger21 comes up with. I hope soon. I will ask him.
The time has come the woodworker said to speak of many things. 0f routers and Wood , chips and paints and stains and CNC and other things.
It's still several months away from completion, but it will do a lot more than just simple dovetails.
http://www.cnczone.com/forums/diy-cn...ls-anyone.html
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
V26 Profile and 3D pro toolpaths support dovetail cutters . You go into the tool crib and choose cuter type dovetail on left .
MikeG
Thank you for the info. It may help people with Ver 26. I have Ver 25 I bought it a month before 26 came out. I asked about getting an upgrade and the reply was less then friendly.
They wanted about 4 times what I had paid for Ver 25 to upgrade to 26. I am retired and a hobbyist and on SSI.
Don
The time has come the woodworker said to speak of many things. 0f routers and Wood , chips and paints and stains and CNC and other things.
Can someone help me write a CNC program using using bolt holes along an angle I am also having problems plotting my points? Thanks. Any help would do.
Sent from my iPhone using Tapatalk