[PTMOS]

Greeting everyone,

I am new to this board and in need of help of identifying this part from our shipyard's CNC plasma and Oxy Fuel Cutting machine. I need to source for this but have no idea what it is called or where to look. This is the only information that they gave me:

Part No: CD 2395-21454-0000
Class H KIP HRE
120/60 FWR
10 Watt 41 10
RFV H

Your guys' help will be very much appreciated!!

-PTMOS

[doorknob]

It looks like it may be the coil part of a solenoid valve.

You might try these guys for more info or repair parts:

KIP Solenoid Valves & Valve Repair Parts for Fluid Control

Dultmeier Sales Product Catalog Search

Also see: http://resources.norgren.com/kip/

[Al_The_Man]

Definitely looks like a solenoid coil, is it a fluid valve or Oxy/Gas?
A local welding supply house should be able to point you to an equivalent.
BTW, with AC solenoids, never apply power with the coil off, or remove the coil with power on, otherwise it can cause instant burn out of the coil, it requires the metallic core for correct current.
KIP valves here http://resources.norgren.com/documen...p/valves03.pdf
(I see the link has already been posted)!
Al.

[PTMOS]

Thank you for your help, Gentlemen. Much appreciated!!

[sohail0110]

it is a solenoid coil 120volt 60Hz and 10watts.
just check the ID and buy the same specs.
regards
sohail

[goms-lumut]

Greeting everyone,

I am new to this board and in need of help of identifying this part from our shipyard's CNC plasma and Oxy Fuel Cutting machine. I need to source for this but have no idea what it is called or where to look. This is the only information that they gave me:

Part No: CD 2395-21454-0000
Class H KIP HRE
120/60 FWR
10 Watt 41 10
RFV H

Your guys' help will be very much appreciated!!

-PTMOS

Hi PTMOS,

i would like to ask you, how you get the solenoid valve coil? because i also having the same problem for CNC machine in my plant. could you tell me who is ur supplier?

thank you

best regards
ding
Grade One Marine Shipyard