[Novakon]

Novakon is pleased to announce we will be attending the Cabin Fever EXPO during April this year. In our spotlight, we have the Torus PRO and Pulsar milling machines in exhibition and we will be performing demonstrations of the Pulsar's rigid tapping and general operation. The Torus PRO will also be featured with our new Power Draw Bar (PDB) and possibly... we will have a display model of the new ATC. We will be available for your questions and we would be very happy to discus the technical abilities in depth.

Both mills will be available for sale and can be picked up after the show. Contact Khai at [email protected] if you are interested in discussing special pricing and availability of the displayed mills.

We hope you can attend and look over our machines. If you plan on attending, chime in and make your intentions known!

We hope to see you there.

Regards,
Novakon Team

[FineLineAuto]

Novakon is pleased to announce we will be attending the Cabin Fever EXPO during April this year. In our spotlight, we have the Torus PRO and Pulsar milling machines in exhibition and we will be performing demonstrations of the Pulsar's rigid tapping and general operation. The Torus PRO will also be featured with our new Power Draw Bar (PDB) and possibly... we will have a display model of the new ATC. We will be available for your questions and we would be very happy to discus the technical abilities in depth.

Both mills will be available for sale and can be picked up after the show. Contact Khai at [email protected] if you are interested in discussing special special pricing and availability of the displayed mills.

We hope you can attend and look over our machines. If you plan on attending, chime in and make your intentions known!

We hope to see you there.

Regards,
Novakon Team

I really wish you would have mentioned this 2 months ago. Your are talking about the one in York, PA right? This is only about an hour away from me.


Nate
Fine Line Automation
Home - Fine Line Automation

[iGAK]

I looked up the info on the Cabin Fever Expo 2014 and found the following:

CABIN FEVER EXPO 2014
Will Be Held April 11-13, 2014
In The Utz Arena (Formerly Toyota Arena)
York Fairgrounds & Expo Center
334 Carlisle Ave. York, PA 17404

More info is available at Home

I have always wanted to attend this show and will. I look forward to the show and the opportunity to meet fellow Novakon users as well as meeting the Novakon crew.

Any other Novakon users planning on attending?

[FineLineAuto]

I may attend on that Friday. I am busy Saturday and Sunday.


Nate
Fine Line Automation
Home - Fine Line Automation

[SCzEngrgGroup]

I will be there as well. Should be fun - I've never been.

Regards,
Ray L.

[FineLineAuto]

Y'all gonna be there on Friday?


Nate
Fine Line Automation
Home - Fine Line Automation

[SCzEngrgGroup]

I'm arriving Thurs evening - flying into Philly around 5PM, then driving over to York. I think the Novakon gang is arriving a bit earlier the same day.

Regards,
Ray L.

[ram48]

I am driving up from Charlotte NC and should be rolling in on Thursday afternoon or evening. I'm looking forward to meeting some of the folks I have been speaking to on here and also meeting and talking to the Novakon team. This show has been on my Radar for a couple of years and Novakon being a vendor this year is icing on the cake for me. I am looking forward to seeing that PDB in action and sure hope the ATC display model makes the trip.
Ray Mc

[bozidar22]

I'll be there Friday maybe Saturday, I live in next county. Have been going since it was a small event at the Lebanon valley expo center.( Wow I'm getting old!) Keeps getting better every year, has some out door displays now that it is held in April.

Can't wait to see the ATC.

[FineLineAuto]

I'll be there Friday maybe Saturday, I live in next county. Have been going since it was a small event at the Lebanon valley expo center.( Wow I'm getting old!) Keeps getting better every year, has some out door displays now that it is held in April.

Can't wait to see the ATC.

I've lived 10 minutes from there since 1994 and haven't ever remember it being held there. Definitely gonna go and check out the fuss. Next year, I think am gonna try to be a vendor next year.


Nate
Fine Line Automation
Home - Fine Line Automation

[gmfoster]

It was at the expo center for a few years and started before that \\\\\\\\










Usually not much going on on Friday except for setup and Auction..

[Novakon]

We will be arriving Wednesday evening and will start setting up Thursday and getting things prepared. It looks like we should have a good crowd this year!

Unfortunately we will not have the new PRO stand available for viewing, they should be arriving to our ware house about the same time we are at the show.

Regards,
John

[Novakon]

We will be ready to go over anything you want....we will be ones playing with the mills.

See you there!

Regards,
Novakon Team

[kvom]

Are you also going to NAMES later in the month?

[Novakon]

Here is an update to the agenda we are putting together for the Cabin Fever EXPO.

A special demonstration of the Pulsar's rigid tapping capabilities will be featured. We have completed, and are now exercising, the post processors using the rigid tapping feature in BobCAD CAM for the Pulsar. We will demonstrate its use from BobCAD CAM to the mill. Make sure to come by and see it in action. I'm sure you will be pleased.

As always, the demo mills are available for sale and may be picked up from the EXPO. Please inquire to [email protected] if you are interested.

Hope to see you there!

Regards,
Novakon Team

[Novakon]

We did look into attending the NAMES show but because it was a last minute consideration, and we had other personal obligations, we could not schedule it. We believe we will make it next year since we will have more time to plan the two shows back to back. It sure would have been nice to be there though.

I hope you can make it to the Cabin Fever!

Regards,
Novakon Team

[ram48]

Cabin Fever is only a couple of weeks away, I did not realize how many vendors and tool supply houses will be on hand, I guess I may need to increase the amount of funds I bring.
One of the things I am looking forward to is being able to at last compare the Novakon and Tormach head to head as Tormach will have an 1100 model on hand and running according to their sales rep.
Man I cannot wait.
Ray Mc

[waltpermenter]

Cabin Fever is only a couple of weeks away, I did not realize how many vendors and tool supply houses will be on hand, I guess I may need to increase the amount of funds I bring.
One of the things I am looking forward to is being able to at last compare the Novakon and Tormach head to head as Tormach will have an 1100 model on hand and running according to their sales rep.
Man I cannot wait.
Ray Mc

me too, i'll be there.I'll be the one with a ballcap and moustache, can't wait to see people in person.
walt

[Novakon]

We have arrived and checked out the EXPO today. Most of the bigger exhibits are being assembled and more exhibits are being moved in. Our mill crates were delivered and we are located adjacent to the Artsoft booth. There was not much we could do today, so we headed to the Hotel and we are now waiting for the rest of the crew.

We will have the Pulsar and Torus PRO on display with full coolant systems. Unfortunately we will not have the new PRO Stand in time. The boat moved too slow to get it here in time, sorry. The Torus PRO has the PDB installed and ready to be demonstrated. Ray will also have a working model of the ATC to view as a dynamic model. Featuring in this show we will have the Pulsar mill performing rigid tapping. We will demonstrate using BobCAD CAM V26, then utilizing our newly developed post processors, for generating the G code for the Pulsar to run. There will be many other milling operations to see also between the Torus PRO and Pulsar. This is a must to see.

The weather is very nice here so far, so if you can come by, please do. For others that can not make it here personally, we will be posting pictures and videos through out the show. If you have any questions, let us know and we will try to provide some sort of supporting video or picture as we go.

We hope you enjoy the coming attractions!

Don't forget that we are offering a free PC upgrade with your mill order at the show!

Regards,
Novakon Team

[CROSSHATCH]

Not too far from me, Gotta check my schedule for this!