[bpt001]

just picked up a cincinnati sabre 500 vmv with a ge fanuc controller needs a lot of work
i am trying to get a peramiters list for it
a photo of the internals electronic panel because it is missing a bourd i can work out witch one by looking at a photo of complete machine.
and any books that you may have on the machine.
any feed back would be appreshated.

[slowlearner]

I believe you have either an 850 or an 850SX control. Although I have limited knowledge on these machines the first thing you need to do is post the serial number and the rest of the info on the ID tag.This should be either on the side door or on the rear door. There are some very good technicians on this forum but you have to give them something to work with.

[bpt001]

serial No 7040-F00-R0-0289
No 91202161D
CNC unit A02B-0098-B511
O-MC ge fanuc
at the factory when you order a new machine with a brand of controller ( fanuc o-mc) it must come in a kit form with all the wireing and boards
can there be a listing out there?
if someone has a cincinnati sabre 500 vmc with a ge fanuc 0-mc controller can you take some photo`s of all the board`s please.

[slowlearner]

My mistake your machine is newer than I thought. I am sure you will get a response soon.