I am putting together a parameter list for 0T's that will get you started. They will need to be edited to suit your machine. They will not include option paramaters.
I am putting together a parameter list for 0T's that will get you started. They will need to be edited to suit your machine. They will not include option paramaters.
is nice to see that someone is involving to help ,but i want to say to you my friend that if you do not have the diagnose that include the PMC paramters with counter,timers,keeprelays,you will never operate the machine ,even if you have the option paramters that are not hard to set on a Fanuc 0 M/T controller.
i also say there is also a possibility to discover all PMC paramters from reading and study the ladder but that is only for models C that are displaying the ladder,on A and B models only if you have it printed.
Good luck.