Dear All,
While running machine in constant cutting mode G96 -- Spindle RPM are varying with radius reducing but Feed ( Actual ) - remain constant
Resultant in increased cycle time.
Any suggestion.
Regard.
Dear All,
While running machine in constant cutting mode G96 -- Spindle RPM are varying with radius reducing but Feed ( Actual ) - remain constant
Resultant in increased cycle time.
Any suggestion.
Regard.
I assume your feedrate is in IPR or MMPR (G97), so lower RPM's will result in lower IPM or MMPM, thus longer cycle times. That's the nature of the beast.